The process
of repairing a roof may be consuming time and expensive. Make sure that the
contractor provides you a quote after going through the damages from both the
sides that is exterior and interior of the house.
The factors which has an impact on cost:
Types of roof:
The cost of
repairs is been influenced mostly due to the type of the roof which is present
on your home. There are various types of roofs they can be sloped or flat, with
a pitch that is low or high and the shingled or metal. The cost of the
materials will differ according to the types of roof and few roofs want more
labour and material than the other kinds. The ones which are very cheap the
shingles are made out of asphalt and the rate per 100 square feet is around £120.
The rate of slate shingles may be around £800 to £1000 per 100 sq ft. and the
shingles made up of tiles may cost around £300 to £500 per 100 sq ft. and the
rate varies according to the material.
Scope:
The price
of the work is determined by the size of the place which has to be repaired.
The price which is determined generally is based on the roofs square footage.
Roofing repairs permits:
The cost of
roofing repairs can be affected by
the place where you live either in city or town. For doing repairs the
contractor may need the pull permits. The cost of the permit may be a rate that
is flat in your area or this may vary on the value and size of your home.
The existence of water damage:
The home
structure can be damaged quickly due to the water existence. The repair which
is caused for the damage of water can be a one that is expensive and increase
the cost that is final. These should not be avoided as it would land up in the
total replacement of roof
Skylights and Chimneys:
The cost
which is charged on roofing can be raised if there are chimneys and skylights.
The replacement should be done in the same time and the roofer should be asked
to check them if there is any existing damage at the time of assessing
shingles.
The roofers
have to work in the area which is around them so even if they need not be
replaced the cost of working around them is more.
0 comments:
Post a Comment